Certification Record

TO THE REQUIREMENTS OF CSA C22.2 NO. 4-1989, UNLESS NOTED OTHERWISE (*):

Fused load break switches and non-fused load break switches, open type, for use in industrial control equipment, 600V ac and less, 250V dc.

• Non-fusible switches, visible contact, Series SCV Series followed by 60 A , 100 A or 200 A.
• Fusible switches, Series FB Series followed by CC 30 A, J 30 A, J 60 A, J 100 A or J 200 A.
• Fusible switches, side operating handle, Series FB Series CC 30A SIDE 2P DH, CC 30A SIDE 3P DH (*)
• Auxiliary contact holder Cat. No. for Series FB Series and SCV Series
• Auxiliary contact designated : NO+NC Type S and NO+NC Type ST, pilot duty A600, N600.
• Auxiliary contact holder, Cat. No. SCP-ITD for FB Series CD CC 30A, FB Series CD J30A and SCV Series 30A.

Note: (*)Certified as miscellaneous switches, i.e. not suitable as a disconnecting means.

Fused load break switches and non-fused load break switches, open type, for use in industrial control equipment.

• Non-fusible switches, Series SCV Series 400 A and SCV Series 600 A, followed by suffixes, 600V ac max, 250V dc max.
• Non-fusible switches, Series SCV Series 800 A, 1000 A and 1200 A, 600V ac max.
• Fusible switches, Series FB Series J 600 A and L 800 A, 600V ac max.
• Fusible switches, Series FB Series J 400 A, 600V ac max, 250V dc max.
• Accessories, shorting links for use with Cat. No. FB Series J60A, J100A, J200A, J400A, J600A and L800A
• Auxiliary contact holder for use on Cat. No. SCV Series 400A, SCV Series 600A, SCV Series 800A, SCV Series 1000A, SCV Series 1200A. 
• Component type handle shafts and shrouds for use with submittor’s certified load break switches, Ref. Nos. D1B, D1R, D2B, D2R, followed by /D or /DT; suitable for use on enclosure Type 3R and 12.
  Ref. Nos.  G1B, G1R, G2B, G2R followed by /D or /DT for use with Type 4/4X.Cat. Nos. H Series followed by numeric and alpha suffixes.
• Component type handle H2 followed by B or R followed by R, D or DR suitable for use on enclosure Type 4/4X, handle F1B.., F2B.. followed by suffixes handles P1B.., P1R.. followed by suffixes, handles H1B.., P2B.. followed by suffixes.

• Component type handles and shafts for use with SOCOMEC certified load break switches, Ref. Nos. S1, S2, S3 and S4, suitable for use on enclosure type 3R, 12. Type S1, S2 and S3 suitable for use on enclosure type 4/4X. Cat. Nos HS Series followed by numeric and alpha suffixes.

• Fused load break switches and non-fused load break switches, open type, for use in industrial control equipment, 600V ac and less, 250V dc certified as disconnecting switches unless noted otherwise (*).

External Frontal Operation mechanism, 3 or 4 pole.

- Non-fusible switches, visible contact, Series SCV Series followed by 60 A , 100 A or 200 A.

- Fusible switches, Series FB Series followed by CC 30 A, J 30 A, J 60 A, J 100 A or J 200 A.

- Auxiliary contact designated : NO+NC Type S and NO+NC Type ST, pilot duty A600,N600.

- Auxiliary contact holder for Series FB Series and SCV Series

- Auxiliary contact holder, Cat. No. 39990710 for CD CC 30A, FB Series CD J30A and SCV Series 30A

Note: (*) Certified as miscellaneous switches to CSA C22.2 no 14-1995, i.e. not suitable as a disconnecting means.

• Fused load break switches and non-fused load break switches, open type, for use in industrial control equipment. Certified as disconnecting switches. External frontal operation mechanism, 3 or 4 pole.

- Non-fusible switches, Series SCV Series 400 A and 600A, followed by suffixes, 600V ac max, 250V dc max.

- Non-fusible switches, Series SCV Series 400A, 600A, 800 A, 1000 A and 1200 A, 600V ac max.

- Fusible switches, Series FB Series J 600 A and L 800 A, 600V ac max.

- Fusible switches, Series FB Series J 400 A, 600V ac max, 250V dc max.

- Accessories, shorting links for use with Cat. No. FB Series J60A, J100A, J200A, J400A, J600A and L800A

- Auxiliary contact holder for use on Cat. No. SCV Series 400A, SCV Series 600A, SCV Series 800A, SCV Series 1000A, SCV Series 1200A.

• Fused load break switches and non-fused load break switches, open type, for use in industrial control equipment, 600V ac and less, 250V dc certified as disconnecting switches unless noted otherwise (*).

Direct Operation mechanism, 3 or 4 pole.

- Non-fusible switches, visible contact, Series SCV Series followed by 60 A , 100 A or 200 A.

- Fusible switches, Series FB Series followed by CC 30 A, J 30 A, J 60 A, J 100 A or J 200 A.

• Fused load break switches and non-fused load break switches, open type, for use in industrial control equipment. Certified as disconnecting switches. Direct operation mechanism, 3 or 4 pole.

- Non-fusible switches, Series SCV Series 400 A and 600A, followed by suffixes, 600V ac max, 250V dc max.

- Fusible switches, Series FB Series J 400 A, 600V ac max, 250V dc max.

- Non-fusible switches, Series SCV Series 800 A, 1000 A and 1200 A, 600Vac max.

- Fusible switches, Series FB Series J 600 A and L 800 A, 600V ac max.

General Note: (*) Certified as miscellaneous switches for central, i.e. not suitable as a disconnecting means.

• Fused load  break switches and non-fused load break switches, open type, for use in industrial control equipment 600V ac and less, 250 V dc certified as disconnecting switches unless noted otherwise.
  - Fusible switches, Series FB Series followed by Suffixes 30 A, J30 A, J60A, J100A, J200A, J400A.
  - Non-fusible switches, visible contact, Series SCV Series followed by 60 A, 100 A, 200 A, 400A.

/ky